Actual color may vary from on-screen representation.
Valspar® The Perfect White® Paint + Primer
Paint walls, doors, trim and accents with confidence - it is the easy, grab-and-go choice for both interior and exterior use providing outstanding durability. As a paint and primer in one, it provides excellent coverage in fewer coats, and the high-quality finish is stain- and weather resistant and scrubbable.
Paint Sheen Comparison
Available sheens for this product
HOW TO USE
UsageProperly prepared interior walls and ceilings including previously painted and primed plaster, wood, brick, drywall, cement and metal.
PrepThoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar Perfect White paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily strained areas, use a coat of Valspar® Interior Multi Purpose Primer-Sealer for optimal color accuracy and coverage. Drywall and Plaster: Fill cracks, pits and voids with patching compound. Allow new plaster to fully cure and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint. Wood: Sand wood smooth and patch holes and imperfections with wood filler or putty and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar Perfect White paint. Metal: Prime bare metal surfaces with Valspar® Anti-Rust Primer.
ApplicationStir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premium quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 30 minute - 60 minute Recoat: 2 hour - 4 hour
Clean-up & DisposalClean up with warm, soapy water.