Valspar Pristine® Interior

As one of our most advanced paint and primer products, this offers luxurious color, single-coat coverage, and an extra advantage: Clean Science™ Technology. It was specifically engineered to repel dirt and resist stains, so it retains its smooth, clean finish over the years, even after repeated washing and scrubbing.

  • Ultra-smooth Paint + Primer
  • Clean Science™ Technology – engineered to repel dirt and resist stains
  • Luxurious, no-fade color
  • Single-coat coverage
  • Stay-clean smoothness
  • Superior scrubbability over time

Sheens

Matte, Satin, Semi-Gloss

Sizes

1 Quart, 1 Gallon


Coverage

300 ft²/gal - 400 ft²/gal


AVAILABLE AT INDEPENDENT RETAILERS

HOW TO USE

  • Usage
    Properly prepared, interior walls and ceilings including previously painted and primed plaster, wood, brick, drywall, cement and metal.
  • Prep
    Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Valspar Pristine paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, use a coat of stain-blocking primer.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premiumquality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 30 minute - 60 minute
    Recoat: 2 hour - 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water. Do not freeze. Keep container closed when not in use. Do not transfer contents to other containers for storage or disposal. In case of spillage, absorb with inert material such as sand or kitty litter. Dispose of contaminated absorbent, container and/or unused contents in accordance with local, state and federal.
Application Temperature
50 - 90 °F
Recommended Coats
2 coats
Dry To the Touch*
30 minute - 60 minute
Recoat*
2 hour - 4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar pristine interior.

Product Number Sheen Base Container Size SDS PDS
080047279645 Matte White 1 Gallon SDS PDS
080047279621 Matte Tint Base 1 Quart SDS PDS
080047279676 Matte Clear 1 Gallon SDS PDS
080047279614 Matte Pastel Base 1 Quart SDS PDS
080047279768 Satin White 1 Quart SDS PDS
080047279805 Satin White 1 Gallon SDS PDS
080047279867 Semi-Gloss Tint Base 1 Quart SDS PDS

Ratings & Reviews