Valspar® Cabinet and Furniture Oil-Enriched Enamel

This cabinet and furniture paint dries to a smooth factory-like finish and stands up to daily use leaving a fade-, scratch-, and scuff resistant finish. Most projects will require little-to-no prep work. The oil-enriched formula provides exceptional durability with no brush marks.

  • Interior & Exterior
  • Oil enriched enamel
  • Exceptional durability
  • Strong factory-like finish with no brushmarks
  • Prevents doors and drawers from sticking
  • Excellent stain resistance
  • Resists scuff marks, fading and scratches

Sheens

Flat, Satin, Semi-Gloss

Sizes

1 Quart, 1 Gallon


Coverage

400 ft²/gal


AVAILABLE AT LOWE'S
Free store pick up

HOW TO USE

  • Usage
    Properly prepared or previously painted interior and exterior doors, trim and cabinets.
  • Prep
    Previously Painted Surfaces: Thoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Scrape off loose and peeling paint. Dull glossy surfaces by sanding. Bare Wood, Plywood/Composition Board: For best results over heavily stained areas and bleeding woods such as redwood and cedar, use a coat of stain-blocking primer. Metal: Remove rust on galvanized surfaces and prime with a rust-inhibitive metal primer. For drastic color changes or deep, vivid colors, prime with this product or an appropriate tintable primer for your optimal color accuracy and coverage. Clean Mildew from the Surface: Mildew is a fungus that looks like dirt, but won’t wash off. Mildew must be removed before painting or it will grow through any new coat of paint. To remove mildew or suspected mildew, scrub surface before painting with a commercial mildew remover or a solution of 1 part liquid chlorine bleach to 3 parts water. Rinse thoroughly. Avoid contact with skin and eyes. Protect skin and eyes by wearing rubber gloves and eye goggles when working with bleach solution.
  • Application
    Stir paint thoroughly. Intermix containers for uniformity. Apply product when surface, air and product temperatures are between 50-90°F. Apply with a premium-quality brush, a synthetic roller cover or airless spray. Thinning not required. Finish with light roller strokes in one direction. Certain deep or bright colors may require an additional coat for complete hide. Surface conditions and application technique may impact coverage.
  • Dry Time
    Dry Time @ 77 °F and 50 % Relative Humidity
    To The Touch: 2 hour - 4 hour
    Recoat: 4 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water. If product has fully dried, you may need mineral spirits.
Application Temperature
50 - 90 °F
Recommended Coats
2 coats
Dry To the Touch*
2 hour - 4 hour
Recoat*
4 hour
*Dry Time @ 77 °F and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar cabinet furniture oil-enriched enamel.

Product Number Sheen Base Container Size SDS PDS
042397609527 Satin Ultra White 1 Quart SDS PDS
042397609541 Satin Ultra White 1 Gallon SDS PDS
042397609534 Satin Base 4 1 Quart SDS PDS
042397609589 Semi-Gloss Ultra White 1 Gallon SDS PDS
042397609572 Semi-Gloss Base 4 1 Quart SDS PDS
042397609596 Semi-Gloss Base 4 1 Gallon SDS PDS
080047570667 Satin Ultra White 1 Quart SDS PDS
080047570681 Satin Ultra White 1 Gallon SDS PDS
080047570742 Satin Base C 1 Quart SDS PDS
080047572555 Satin Base C 1 Gallon SDS PDS
080047572562 Semi-Gloss Ultra White 1 Quart SDS PDS
080047572579 Semi-Gloss Ultra White 1 Gallon SDS PDS
080047572586 Semi-Gloss Base C 1 Quart SDS PDS
080047572609 Flat Ultra White 1 Quart SDS PDS
080047573064 Flat Ultra White 1 Gallon SDS PDS
080047573071 Flat Base C 1 Quart SDS PDS
080047573088 Flat Base C 1 Gallon SDS PDS
080047572593 Semi-Gloss Base C 1 Gallon SDS PDS
080047573095 Satin Indigo Streamer 1 Quart SDS PDS
080047573101 Satin Dark Kettle Black 1 Quart SDS PDS
080047573118 Satin Swiss Coffee 1 Quart SDS PDS
080047573125 Satin Gravity 1 Quart SDS PDS

Ratings & Reviews