Actual color may vary from on-screen representation.
Valspar SeasonPLUS® Exterior Paint & Primer
This paint and primer with complete color defense™ blocks UV rays plus gives a mold- and mildew-resistant finish for a longer lasting color. The 100% acrylic formula also offers excellent hide along with a strong finish that resists cracking and peeling.
Paint Sheen Comparison
Available sheens for this product
Flat, Satin, Semi-Gloss
1 Quart, 1 Gallon, 5 Gallon
HOW TO USE
UsageProperly prepared exterior surfaces of wood, hardboard, aluminum siding, vinyl siding, masonry, brick, stucco, cement composition panels and metal. Not for use on floors.
PrepRemove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Scrape and sand peeled or damaged paint to a sound surface. Sand glossy surfaces dull. Seal stains from water, smoke, ink, pencil, grease, etc. with the appropriate primer/sealer. Caulk around windows, doors, and other openings after spot priming bare surfaces with SeasonPLUS™ Exterior Paint + Primer.
ApplicationStir paint thoroughly. Intermix containers for uniformity. When air temperature is 35°F, substrates may be colder; prior to painting, check to be sure the air, surface, and material temperatures are above 35°F and at least 5°F above the dew point. Avoid using if rain or snow is expected within 2-3 hours. Do not apply when air or surface temperatures may drop below 35°F within 48 hours. On large expanses of metal siding, the air, surface, and material temperatures must be 50°F or higher. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding. Always paint back into freshly painted areas and end up at a door, window or outer edge. Move windows after 1 hour to prevent sticking.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 2 hour Recoat: 1 hour
Clean-up & DisposalClean up with warm, soapy water.