Actual color may vary from on-screen representation.
Valspar® Defense™ Exterior Paint & Primer
With Advanced Water Beading Technology, this is our most cutting-edge exterior one-coat paint and primer and your home’s first line of defense against the roughest of elements. Get exceptional protection against moisture damage, a mold-, mildew- and algae-resistant finish, exceptional durability and defense against fading, cracking and peeling. Rain Ready Technology®— ready in just 1 hour — guards freshly painted surfaces from runs, blisters or watermarks once rain showers begin.
Paint Sheen Comparison
Available sheens for this product
Flat, Satin, Semi-Gloss
1 Quart, 1 Gallon, 5 Gallon
HOW TO USE
UsageProperly prepared exterior surfaces
PrepThoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew.
ApplicationStir paint thoroughly. Intermix containers for uniformity. When air temperature is 35°F, substrates may be colder; prior to painting, check to be sure the air, surface and material temperatures are above 35°F and at least 5°F above the dew point. Avoid using if rain or snow is expected within 1 hour. Do not apply when air or surface temperatures may drop below 35°F within 48 hours. On large expanses of metal siding, the air, surface and material temperatures must be 50°F or higher. No reduction necessary. Some deep or bright colors, surface conditions and application technique may impact coverage and require more than one coat to achieve your optimal coverage.
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 2 hour Recoat: 2 hour - 4 hour
Clean-up & DisposalClean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.